Method of adjusting temperature controller

The adjustment method of the mechanical temperature controller is relatively simple. After the temperature controller has been installed (the staff will install it when installing the floor heating), it can be used. We turn the switch on the right side of the thermostat to the open position, after setting the setting temperature (rotate the setting temperature button on the thermostat, align the temperature scale you want to set with the point in the middle of the thermostat, so that the thermostat setting is completed), the thermostat also starts to control according to the temperature set. When the indicator on the temperature controller is on, it indicates that the heating setting is in the working state. When the indicator is off, it indicates that the temperature controller is at a standstill

Today's electronic thermostats generally have LCD screens and can be either touch-tone or touch-screen, but they all operate in the same way, just touch and button.

Now the electronic liquid crystal temperature controller generally has 5 keys, the left two is to adjust the height, the upper left corner is plus, the lower left corner is minus. The upper right corner is the select mode button, which will be adjusted by the merchants during the installation, and is not used by the users at ordinary times. The small key in the middle of the right is the timing key, if the need for timing can be used, under normal circumstances also not much. The right corner is a switch function.