What should I pay attention to when using bimetallic jump thermostat?

What should bimetallic jump temperature controller pay attention to? Bimetallic jump type temperature controller is to use bimetallic pieces as a temperature control switch, then in the use of bimetallic jump type temperature controller should pay attention to what matters?

1, installation can not be the top of the lid surface collapse, loose and deformation, in order to avoid affecting its performance.

2, in the use of no larger than 5A current circuit, should choose copper core cross-section is 0. 5-1㎜2 wire; If the current is not greater than 10A, choose the copper core section of 0.75 to 1.2mm2 wire, if not more than 15A can choose 1.2 to 1.5mm2 wire.

3, can not let the liquid into the bimetal jump type temperature controller internal, can not make the shell cracks, can not casually change the shape of the external terminal.

4. When installing the contact jump temperature controller, the metal cover should be tightly attached to the installation surface of the controlled device. In order to ensure the temperature sensing effect, the thermal conductive silicone grease or other thermal conductive media with similar properties should be coated on the temperature sensing surface.

5. Bimetal jump temperature controller should be stored in a ventilated, dry, non-corrosive gas and clean warehouse with relative humidity less than 90% and ambient temperature below 40 degrees.